{
	"type": "filament",
	"name": "Bedrock 3D PLA",
	"inherits": "Generic PLA @System",
	"from": "User",
	"version": "2.4.2",
	"filament_settings_id": [
		"Bedrock 3D PLA"
	],
	"filament_vendor": [
		"Bedrock 3D"
	],
	"nozzle_temperature": [
		"220"
	],
	"nozzle_temperature_initial_layer": [
		"220"
	],
	"nozzle_temperature_range_low": [
		"210"
	],
	"nozzle_temperature_range_high": [
		"230"
	],
	"hot_plate_temp": [
		"60"
	],
	"hot_plate_temp_initial_layer": [
		"60"
	],
	"textured_plate_temp": [
		"60"
	],
	"textured_plate_temp_initial_layer": [
		"60"
	],
	"filament_density": [
		"1.252"
	],
	"filament_cost": [
		"23.87"
	],
	"filament_notes": [
		"Bedrock 3D PLA, from Printerials: https://printerials.com/materials/bedrock-3d-pla\nMade on 22 Nov 2026 from what the sources on that page state.\n\nNozzle temperature: 220 °C (Read from a published page)\nNozzle temperature range: 210 °C to 230 °C (Read from a published page)\nBed temperature: 60 °C (Read from a published page), on the High Temp and Textured PEI plates\nDensity: 1.252 g/cm³ (Read from a published page)\nPrice: €23.87/kg, the cheapest current offer, at Filament2Print on 22 Nov 2026. In euros: a slicer counts it in whatever currency it is set to.\n\nNot stated by any source, so kept from Generic PLA:\n- diameter: sold in 1.75 mm, 2.85 mm, so set the one on your spool"
	]
}
