# https://printerials.com/materials/bedrock-3d-pla [filament:Bedrock 3D PLA] filament_vendor = Bedrock 3D filament_type = PLA temperature = 220 first_layer_temperature = 220 bed_temperature = 60 first_layer_bed_temperature = 60 filament_density = 1.252 filament_cost = 23.87 filament_notes = "Bedrock 3D PLA, from Printerials: https://printerials.com/materials/bedrock-3d-pla\nMade on 22 Nov 2026 from what the sources on that page state.\n\nNozzle temperature: 220 °C (Read from a published page)\nBed temperature: 60 °C (Read from a published page)\nDensity: 1.252 g/cm³ (Read from a published page)\nPrice: €23.87/kg, the cheapest current offer, at Filament2Print on 22 Nov 2026. In euros: a slicer counts it in whatever currency it is set to.\n\nNot stated by any source, so PrusaSlicer's defaults for a new filament apply:\n- diameter: sold in 1.75 mm, 2.85 mm, so set the one on your spool" [presets] filament = Bedrock 3D PLA