# https://printerials.com/materials/colorfabb-pha-pla [filament:ColorFabb PHA PLA] filament_vendor = ColorFabb filament_type = PLA temperature = 210 first_layer_temperature = 210 bed_temperature = 60 first_layer_bed_temperature = 60 filament_density = 1.24 filament_cost = 20.88 filament_notes = "ColorFabb PHA PLA, from Printerials: https://printerials.com/materials/colorfabb-pha-pla\nMade on 22 Nov 2026 from what the sources on that page state.\n\nNozzle temperature: 210 °C (Prusa material table, https://help.prusa3d.com/filament-material-guide)\nBed temperature: 60 °C (Prusa material table, https://help.prusa3d.com/filament-material-guide)\nDensity: 1.24 g/cm³ (Open Filament Database, https://openfilamentdatabase.org)\nPrice: €20.88/kg, the cheapest current offer, at colorFabb on 22 Nov 2026. In euros: a slicer counts it in whatever currency it is set to.\n\nNot stated by any source, so PrusaSlicer's defaults for a new filament apply:\n- diameter: sold in 1.75 mm, 2.85 mm, so set the one on your spool" [presets] filament = ColorFabb PHA PLA