ABS specifications and typical price
Acrylonitrile Butadiene Styrene - Strong, temperature-resistant
Typical figures for ABS
- Materials
- 244
- Brands
- 106
- Colours
- 1,395
- Per kilogram, typical material
- €24.80
- Middle half €18.02–€44.27, over 130 materials with a price
Typical ABS: €22.15/kg, median of 619 colours at 33 shops
On 21 Nov 2026. The middle half of colours cost €15.64–€31.34.
Each colour's cheapest price per kg, for spools and refills at shops that include VAT. The line compares the same listings from one day to the next, so a shop starting or stopping does not move it.
| Property | Middle half | Full range | Stated for |
|---|---|---|---|
| Nozzle temperature1,2,3,4,5 | 245–250 °C | 210–290 °C | 138 of 244 materials |
| Bed temperature1,2,3,4,5 | 100 °C | 75–120 °C | 138 of 244 materials |
| Drying temperature, at most1,5 | 66–80 °C | 55–85 °C | 10 of 244 materials |
| Density1,4,5 | 1.04–1.05 g/cm³ | 1.03–1.3 g/cm³ | 155 of 244 materials |
| Heat deflection temperature2,5 | 90–98 °C | 81–100 °C | 9 of 244 materials |
| Tensile strength2,5 | 33–39 MPa | 30–47 MPa | 9 of 244 materials |
| Impact strength (Charpy)2 | 21–34 kJ/m² | 19–72 kJ/m² | 7 of 244 materials |
Sources
- 1Open Filament Database(opens in a new tab)
- 2Prusa material table(opens in a new tab)
- 3SpoolmanDB(opens in a new tab)
- 4Source not recorded
- 5Read from a published page
The middle half runs from the 25th to the 75th percentile of each material's typical figure. A property is listed once at least 5 materials state it.
| How it prints | For ABS | Who says so |
|---|---|---|
| Enclosure recommended | Recommended | Prusa material table: 10 of 10 materials(opens in a new tab) |
| Recommended | Bambu Lab filament guide(opens in a new tab) | |
| Dry storage recommended | Not needed | Prusa material table: 10 of 10 materials(opens in a new tab) |
| Not needed | Bambu Lab filament guide(opens in a new tab) | |
| Dry before use | Recommended | Bambu Lab filament guide(opens in a new tab) |
| How it prints | Materials, on every colour |
|---|---|
| Needs a hardened nozzle | 22 of 234 materials |
| High flow | 2 of 234 materials |
| Ventilation recommended | 53 of 234 materials |
| Enclosure recommended | 9 of 234 materials |
| Self-extinguishing | 3 of 234 materials |
| ESD safe | 2 of 234 materials |
| Changes colour with heat | 2 of 234 materials |
| Changes colour in sunlight | 3 of 234 materials |