PETG specifications and typical price
Polyethylene Terephthalate Glycol - Durable and chemical resistant
Typical figures for PETG
- Materials
- 440
- Brands
- 148
- Colours
- 3,391
- Per kilogram, typical material
- €23.99
- Middle half €15.21–€39.90, over 209 materials with a price
Typical PETG: €19.76/kg, median of 1,531 colours at 46 shops
On 21 Nov 2026. The middle half of colours cost €13.50–€26.44.
Each colour's cheapest price per kg, for spools and refills at shops that include VAT. The line compares the same listings from one day to the next, so a shop starting or stopping does not move it.
| Property | Middle half | Full range | Stated for |
|---|---|---|---|
| Nozzle temperature1,2,3,4,5,6 | 235–245 °C | 190–295 °C | 291 of 440 materials |
| Bed temperature1,2,3,4,5,6 | 79–80 °C | 0–110 °C | 288 of 440 materials |
| Chamber temperature2 | 35–37 °C | 0–60 °C | 6 of 440 materials |
| Drying temperature, at most2,6 | 64–65 °C | 50–80 °C | 36 of 440 materials |
| Density2,4,5,6 | 1.25–1.27 g/cm³ | 1.13–4 g/cm³ | 316 of 440 materials |
| Heat deflection temperature3,6 | 68–77 °C | 62–96 °C | 29 of 440 materials |
| Tensile strength3,6 | 45–51 MPa | 33–53 MPa | 23 of 440 materials |
| Impact strength (Charpy)3 | 27–59 kJ/m²2 materials did not break | 18–79 kJ/m² | 16 of 440 materials |
Sources
- 1Entered by Printerials
- 2Open Filament Database(opens in a new tab)
- 3Prusa material table(opens in a new tab)
- 4SpoolmanDB(opens in a new tab)
- 5Source not recorded
- 6Read from a published page
The middle half runs from the 25th to the 75th percentile of each material's typical figure. A property is listed once at least 5 materials state it.
| How it prints | For PETG | Who says so |
|---|---|---|
| Enclosure recommended | Not needed | Prusa material table: 19 of 19 materials(opens in a new tab) |
| Not needed | Bambu Lab filament guide(opens in a new tab) | |
| Dry storage recommended | Not needed | Prusa material table: 19 of 19 materials(opens in a new tab) |
| Not needed | Bambu Lab filament guide(opens in a new tab) | |
| Dry before use | Recommended | Bambu Lab filament guide(opens in a new tab) |
| How it prints | Materials, on every colour |
|---|---|
| Needs a hardened nozzle | 71 of 423 materials |
| High temperature | 1 of 423 materials |
| High flow | 16 of 423 materials |
| Ventilation recommended | 1 of 423 materials |
| Self-extinguishing | 3 of 423 materials |
| ESD safe | 1 of 423 materials |
| Changes colour in sunlight | 6 of 423 materials |