PP specifications and typical price
Polypropylene
Typical figures for PP
- Materials
- 47
- Brands
- 30
- Colours
- 97
- Per kilogram, typical material
- €68.71
- Middle half €35.81–€80.13, over 20 materials with a price
Typical PP: €54.39/kg, median of 63 colours at 13 shops
On 21 Nov 2026. The middle half of colours cost €35.92–€79.90.
Each colour's cheapest price per kg, for spools and refills at shops that include VAT. The line compares the same listings from one day to the next, so a shop starting or stopping does not move it.
| Property | Middle half | Full range | Stated for |
|---|---|---|---|
| Nozzle temperature1,2,3 | 225–238 °C | 190–310 °C | 31 of 47 materials |
| Bed temperature1,2,3 | 80–90 °C | 40–120 °C | 31 of 47 materials |
| Density1,3 | 0.9–0.93 g/cm³ | 0.89–1.82 g/cm³ | 31 of 47 materials |
| Heat deflection temperature2 | 56–127 °C | 54–158 °C | 5 of 47 materials |
| Tensile strength2 | 16–30 MPa | 14–42 MPa | 5 of 47 materials |
Sources
- 1Open Filament Database(opens in a new tab)
- 2Prusa material table(opens in a new tab)
- 3Source not recorded
The middle half runs from the 25th to the 75th percentile of each material's typical figure. A property is listed once at least 5 materials state it.
| How it prints | For PP | Who says so |
|---|---|---|
| Enclosure recommended | Recommended | Prusa material table: 3 of 3 materials(opens in a new tab) |
| Dry storage recommended | Not needed | Prusa material table: 3 of 3 materials(opens in a new tab) |
| How it prints | Materials, on every colour |
|---|---|
| Needs a hardened nozzle | 13 of 43 materials |
| Enclosure recommended | 3 of 43 materials |
| Dry storage recommended | 1 of 43 materials |
| ESD safe | 1 of 43 materials |