PC specifications and typical price
Polycarbonate
Typical figures for PC
- Materials
- 87
- Brands
- 43
- Colours
- 225
- Per kilogram, typical material
- €43.06
- Middle half €32.44–€64.95, over 43 materials with a price
Typical PC: €37.96/kg, median of 116 colours at 21 shops
On 21 Nov 2026. The middle half of colours cost €30.36–€50.80.
Each colour's cheapest price per kg, for spools and refills at shops that include VAT. The line compares the same listings from one day to the next, so a shop starting or stopping does not move it.
| Property | Middle half | Full range | Stated for |
|---|---|---|---|
| Nozzle temperature1,2,3,4,5 | 270–280 °C | 240–320 °C | 53 of 87 materials |
| Bed temperature1,2,3,4,5 | 110 °C | 70–130 °C | 53 of 87 materials |
| Density1 | 1.2 g/cm³ | 1.04–1.38 g/cm³ | 51 of 87 materials |
Sources
- 1Open Filament Database(opens in a new tab)
- 2Prusa material table(opens in a new tab)
- 3SpoolmanDB(opens in a new tab)
- 4Source not recorded
- 5Read from a published page
The middle half runs from the 25th to the 75th percentile of each material's typical figure. A property is listed once at least 5 materials state it.
| How it prints | For PC | Who says so |
|---|---|---|
| Enclosure recommended | Recommended | Prusa material table: 4 of 4 materials(opens in a new tab) |
| Recommended | Bambu Lab filament guide(opens in a new tab) | |
| Dry storage recommended | Not needed | Prusa material table: 4 of 4 materials(opens in a new tab) |
| Required | Bambu Lab filament guide(opens in a new tab) | |
| Dry before use | Required | Bambu Lab filament guide(opens in a new tab) |
| How it prints | Materials, on every colour |
|---|---|
| Needs a hardened nozzle | 11 of 81 materials |
| High temperature | 1 of 81 materials |
| Enclosure recommended | 2 of 81 materials |
| Self-extinguishing | 2 of 81 materials |
| ESD safe | 1 of 81 materials |