Skip to content
PrinterialsPrinterials home

COEX PETG

PETGMarble

COEX PETG comes in 16 colours. No shop we follow lists a price we can compare yet.

Colours16

Prices, any colour

Each shop's cheapest listing.

Choose a country to see shipping costs and to hide shops that do not deliver there.
Offers, cheapest first
ShopPriceSpool 500 g · excl. VATPer kgStockGo to shop
In stock€18.20 (USD)€36.39In stockView

Some links to shops earn us a commission. It costs you nothing extra. How we rank these offers

About these prices

Prices are collected automatically and may differ. Always check the amount in the shop itself.

Other PETG in stock

All PETG
  • PolymakerPolylite PETG

    1 kg–5 kg · 1.75 mm / 2.85 mm

    €14.38/kg

    in stock · 8 shops

  • PrusamentPETG

    25 g–2 kg€38.49 for 2 kg

    €19.25/kg

    in stock · 6 shops

  • Bambu LabPETG Basic

    1 kg

    €18.99/kg

    in stock · 6 shopsRefill is cheaper

  • PrusamentMatte PETG

    1 kg

    €26.39/kg

    in stock · 6 shops

Best price per colour

No prices yet

Specifications

Typical PETG figures
Specifications for COEX PETG
BrandCOEX
MaterialPETG
Diameter1.75 mm · 2.85 mm
Sold in500 g · 1 kg · 2.27 kg · 4.08 kg · 6.8 kg
Nozzle temperatureRead from a published page240–265 °C
Bed temperatureRead from a published page70–90 °C
Drying temperature, at mostRead from a published page65 °C
DensityRead from a published page1.27 g/cm³
Heat deflection temperatureRead from a published page62.2 °C
Technical data sheetOpen(opens in a new tab)

Slicer profile

The temperatures, density and diameter the sources on this page state, as a preset to import into your slicer.

  • No source states one nozzle temperature inside 240 °C to 265 °C, so the OrcaSlicer profile sets that range and keeps Generic PETG's print temperature.
  • No source states one bed temperature, so the OrcaSlicer profile keeps Generic PETG's.
How to import these

OrcaSlicer: File > Import > Import Configs, then choose the .json. It is listed with your own presets, built on Generic PETG.

No PrusaSlicer profile: PrusaSlicer fills whatever a file leaves out with its own defaults, so it needs a stated nozzle and bed temperature.

From people who printed with COEX PETG.

No reviews of COEX PETG yet.

How reviews work

Prints in these colours

No photos of prints in COEX PETG yet.

More from COEX

All COEX materials
  • COEX3D PLA

    1 kg

    No prices available

  • COEX3D ABS

    1 kg

    No prices available

  • COEX3D ASA

    1 kg

    No prices available

  • COEX3D Silk PLA

    1 kg

    No prices available