E3D Edge
E3D Edge comes in 0 colours. No shop we follow lists a price we can compare yet.
Colours0
Colours not listed yet.
Other PETG in stock
All PETGPolymakerPolylite PETG
1 kg–5 kg · 1.75 mm / 2.85 mmTranslucent
€14.38/kg
in stock · 8 shops
Bambu LabPETG Basic
1 kg
€18.99/kg
in stock · 7 shopsRefill is cheaper
PrusamentPETG
25 g–2 kg€38.49 for 2 kgTranslucent, Sparkle, Neon
€19.25/kg
in stock · 6 shops
PrusamentMatte PETG
25 g–1 kgMatte
€26.39/kg
in stock · 6 shops
Specifications
Typical PETG figures| Brand | E3D |
|---|---|
| Material | PETG |
| Nozzle temperaturePrusa material table, PrusaSlicer, Original Prusa i3 MK3S profile | 240 °C |
| Bed temperaturePrusa material table, PrusaSlicer, Original Prusa i3 MK3S profile | 90 °C |
| Heat deflection temperaturePrusa material table, ISO 75, 0.45 MPa | 77 °C |
| Tensile strengthPrusa material table, ISO 527-1 | 51 MPa |
| Impact strength (Charpy)Prusa material table, ISO 179-1 | 47 kJ/m² |
Slicer profile
The temperatures, density and diameter the sources on this page state, as a preset to import into your slicer.
- No source states the density, so the OrcaSlicer profile keeps Generic PETG's.
How to import these
OrcaSlicer: File > Import > Import Configs, then choose the .json. It is listed with your own presets, built on Generic PETG.
PrusaSlicer: File > Import > Import Config Bundle, then choose the .ini. What it does not set is PrusaSlicer's default for a new filament.
Reviews
From people who printed with E3D Edge.
No reviews of E3D Edge yet.
How reviews workPrints in these colours
No photos of prints in E3D Edge yet.
More from E3D
All E3D materialsE3Dother
Translucent
No prices available