Filoalfa PET-G
Filoalfa PET-G costs from €34.00 at 1 shop, in 11 colours.
Some links to shops earn us a commission. It costs you nothing extra.
Colours11
All 11 colours with a price cost the same.
Prices, any colour
Each shop's cheapest listing.
| Shop | PriceSpool 700 g · incl. VAT | Per kg | Stock | Go to shop |
|---|---|---|---|---|
| In stock | €34.00 | €48.57 | In stock | View |
| ||||
Some links to shops earn us a commission. It costs you nothing extra. How we rank these offers
About these prices
Prices are collected automatically and may differ. Always check the amount in the shop itself.
Other PETG in stock
All PETGPolymakerPolylite PETG
1 kg–5 kg · 1.75 mm / 2.85 mmTranslucent
€14.38/kg
in stock · 8 shops
PrusamentPETG
25 g–2 kg€38.49 for 2 kgTranslucent, Sparkle, Neon
€19.25/kg
in stock · 6 shops
Bambu LabPETG Basic
1 kg
€18.99/kg
in stock · 6 shopsRefill is cheaper
PrusamentMatte PETG
1 kgMatte
€26.39/kg
in stock · 6 shops
Specifications
Typical PETG figures| Brand | Filoalfa |
|---|---|
| Material | PETG |
| Diameter | 1.75 mm · 2.85 mm |
| Sold in | 700 g · 2.5 kg |
| Nozzle temperatureRead from a published page | 210–230 °C |
| Bed temperatureRead from a published page | 0–70 °C |
| DensityRead from a published page | 1.27 g/cm³ |
| Technical data sheet | Open(opens in a new tab) |
Price history
Across every colour of this material
Solid line: cheapest offer. Dotted: average. The band runs from the cheapest to the most expensive offer on that day. Only spools and refills count — a 25 g sample and a multipack are not a comparable purchase.
Slicer profile
The temperatures, density and diameter the sources on this page state, as a preset to import into your slicer.
All colours
- No source states one nozzle temperature inside 210 °C to 230 °C, so the OrcaSlicer profile sets that range and keeps Generic PETG's print temperature.
- No source states one bed temperature, so the OrcaSlicer profile keeps Generic PETG's.
How to import these
OrcaSlicer: File > Import > Import Configs, then choose the .json. It is listed with your own presets, built on Generic PETG.
No PrusaSlicer profile: PrusaSlicer fills whatever a file leaves out with its own defaults, so it needs a stated nozzle and bed temperature.
Reviews
From people who printed with Filoalfa PET-G.
No reviews of Filoalfa PET-G yet.
How reviews workPrints in these colours
No photos of prints in Filoalfa PET-G yet.
More from Filoalfa
All Filoalfa materialsFiloalfaHIPS
700 g–2.3 kg · 1.75 mm / 2.85 mm€79.00 for 2.3 kgMetallic
€34.35/kg
in stock · 1 shop
FiloalfaPLA
700 g–2.5 kg · 1.75 mm / 2.85 mm€84.00 for 2.5 kgSparkle, Metallic, Matte
€33.60/kg
in stock · 1 shop
FiloalfaAlfapro
700 g–2.5 kg · 1.75 mm / 2.85 mm€119.00 for 2.5 kgMetallic
€47.60/kg
in stock · 1 shop
FiloalfaABSpeciale
700 g–2.3 kg · 1.75 mm / 2.85 mm€39.00 for 700 gMetallic
€55.71/kg
in stock · 1 shop